Pegasus Master 5.7kW Dimmer
The Master 6×5.7kW dimmer has the same features as the 12-channel versions. Difference applies as described below.
 |
| Pegasus Master 5.kW H2 back view |
 |
| Pegasus Master 5.kW H2 back view |
Main features:
- Access to functions by five buttons
- Control signals are indicated on LCD and by LEDs
- Output signals are indicated by LEDs
- Three different DMX addressing:
- Normal start set
- Single channel patch
- Binary DMX set
- PreHeats and MaxLevels for each channel
- Five output curves (lin, log, inv log, switch, custom)
- Displaying incoming DMX level for checking
- One by one channel operation check
- User customizable 40-step sequence for standalone mode
- Two fan speeds depending on internal heat (low noise)
- Overheat potection
- Overload protection by circuit breakers (C25A 1P)
- Microprocessor generated zero-cross point
- Soft flash handling to eliminate MCB strikedown
- DMX-512 (DMX-512A ready) and optional analog (0-10 V) control
- 10 V output for small analog control desks (optional)
- Option for 1P+N circiut breakers
- Option for backside XLR connectors
| Technical Specifications | |
| Power | 3×50 A Mains via 5×10mm2 H07 rubber cable without CEE plug |
| Output Power | 6×25 A (6×5.7 kW) |
| Control Connectors | 5 pole XLR Input-Throughput for DMX-512 15 pole SUB-D male for Analog inputs (optional) |
| Input resistance | 47 kOhm at the analog inputs |
| Protection | DMX and Analog inputs are over voltage protected with TVS C25A 1P circuit breakers on the outputs |
| Corrosion protection | Electrostatic sintering |
| Operating temperature | 10 °C to 40 °C |
| Dimensions | 19" 3 unit rack 484×132×350 (W×H×D) in mm + connectors |
| Weight | 18 kg (net) 20 kg (gross) |
Ordering information:
- MASTER 5.7kW-H (2×6 pole ’Harting’ outputs)
- MASTER 5.7kW-PC (6×PowerCon32 outputs)
Use /1P+N suffix in the order to have 1P+N circiut breakers.