Pegasus Pro Dimmers

Pegasus® Pro dimmer (12-channel version)
Pegasus Pro 12kW front view

The Pro series has the same electric parameters as the Master series. Difference applies in the user controlling method as described below.

  • Twelve LEDs to indicate the control signal
  • Twelve LEDs to indicate the output signal
  • Three LEDs for phase good check
  • DMX start address on seven segment display
  • Address set by two buttons
  • Test function to check operation and loads
  • Internal chaser effects for stand-alone mode
  • Two fan speeds depending on internal heat (low noise)
  • Overheat protection
  • Overload protection by circuit breakers (C10A 1P)
  • Digital PreHeat control for phase units
    from 0 % to 30 %
  • Three selectable characteristics for phase units (voltage linear, phase angle linear, switch)
  • Microprocessor controlled zero-cross point
  • Soft flash handling to eliminate MCB strikedown
  • DMX-512 (DMX-512A ready) and optional analog (0-10 V) control
  • Option for backside XLR connectors
  • Option for 1P+N circiut breakers
  • Orderable with 40 A / 30 mA RCD or with 4-pole main switch

Output types:

The following output types are available:

  • Shucko / French / UK / CEE16 socket type for all channels
  • 24 pole + earth ‘Harting’ type
  • 2×16 pole + earth ‘Harting’ type
  • 3×10 pole + earth ‘Harting’ type
  • 2×19 pole Socapex
Technical Specifications
Power 3×40 A Mains via 5×6mm2 H07 rubber cable without CEE plug
Output Power 12×10 A (12×2.3 kW)
Control Connectors 5 pole XLR Input-Throughput for DMX-512
15 pole SUB-D male for Analog inputs (optional)
Input resistance 47 kOhm at the analog inputs
Protection DMX and Analog inputs are over voltage protected with TVS
C10A 1P circuit breakers on the outputs
Corrosion protection Electrostatic sintering
Operating temperature 10 °C to 40 °C
Dimensions 19” 3 unit rack 484×132×350 (WxHxD) in mm + connectors
Weight 18 kg (net) 20 kg (gross)

Ordering information:

  • PRO 12-S ('Schuko' outputs)
  • PRO 12-F ('French & Belgian' outputs)
  • PRO 12-UK ('UK' outputs)
  • PRO 12-H1 (24 pole 'Harting' output)
  • PRO 12-H2 (2×16 pole 'Harting' outputs)
  • PRO 12-H3 (3×10 pole 'Harting' outputs)
  • PRO 12-SX ('Socapex' outputs)
  • PRO 12-C (12×3-pole 16 A CEE outputs)

Use /B suffix in the order to have DMX input on the back of the unit.
Use /1P+N suffix in the order to have 1P+N circiut breakers.