Pegasus xLite 2.3kW Dimmer

Pegasus xLite 2.3kW Dimmer front view The xLite dimmer is the semi-professional, highly affordable unit ideal for small theatres, culture centers or similar places. They have the following features:

  • 100μS rise time filter per channel
  • Twelve LEDs to indicate the control signal
  • Three LEDs to phase good check
  • DMX start address on seven segment display
  • Address set by two buttons
  • Test function to check operation and loads
  • Internal chaser effects for stand-alone mode
  • Two fan speeds depend on internal heat (low noise)
  • Overheat protection
  • Overload protection by circuit breakers (C10 A 1P)
  • Digital PreHeat control for phase units from 0% to 30%
  • Three selectable characteristics for phase units
    (voltage linear, phase angle linear, switch)
  • Microprocessor controlled zero-cross point
  • Soft flash handling to eliminate MCB strikedown
  • DMX-512 (DMX-512A ready) and optional analog (0-10 V) control
  • 10 V output for small analogue control desks (optional)
  • Option for 1P+N circiut breakers
  • Option for front and backside XLR connectors

Output types:

The following output types are available:

  • Shucko / French / UK / CEE16 socket type for all channels
  • 24 pole + earth ‘Harting’ type
  • 2×16 pole + earth ‘Harting’ type
  • 3×10 pole + earth ‘Harting’ type
  • 2×19 pole Socapex
Technical Specifications
Power 3×40 A Mains via 5×6mm2 H07 rubber cable without CEE plug
Output Power 12×10 A (12×2.3 kW)
Control Connectors 5 pole XLR Input-Throughput for DMX-512
15 pole SUB-D male for Analog inputs (optional)
Input resistance 47 kOhm at the analog inputs
Protection C10A 1P circuit breakers per channel
Corrosion protection Electrostatic sintering
Operating temperature 10 °C to 40 °C
Dimensions 19” 3 unit rack 484×132×350 (WxHxD) in mm + connectors
Weight 17 kg (net) 19 kg (gross)

Ordering information:

  • xLite-S (’Shucko’ outputs)
  • xLite-F (’French & Belgian’ outputs)
  • xLite-UK (’UK’ outputs)
  • xLite-H1 (24 pole ’Harting’ output)
  • xLite-H2 (2×16 pole ’Harting’ outputs)
  • xLite-H3 (3×10 pole ’Harting’ outputs)
  • xLite-SX (2×19 pole ’Socapex’ outputs)
  • xLite-C (12×3 pole CEE16 outputs)

Use /B suffix in the order to have DMX input on the back of the unit.
Use /1P+N suffix in the order to have 1P+N circiut breakers.