Pegasus Mini Master dimmers

Description

If you are looking for small 6-channel dimmer pack with the same features as our 12-channel Master dimmer has, the Mini Master is the best choice for you. The range of Mini dimmers can be installed in rack containers or usedas portable dimmer packs.

Main features

  • 6×2.3 kW (6×10 A), 6×3 kW (6×13 A)and 6×3.7 kW (6×16 A) models
  • Mains input via rubber cable with CEE32A 5P plug or on Screw terminal blocks
  • True100μs rise time filtering
  • Easy menu control with four push buttons and blue LCD
  • Local control with seven illuminated slide potmeters (for the 6 channels + Grand Master)
  • Control signals indicated by green LEDs
  • AC output indicated by yellow LEDs
  • Global DMX address set or SoftPatch
  • Individually selectable parameters per channel:
    • PreHeat
    • MaxLevel
    • Control curves (Voltage Linear, Phase-Angle Linear,Square, Fluorescent, Switch and User-Editable)
    • DMX Address (SoftPatch)
  • Test function to check channels one by one
  • User editable 20-step sequence for standalone mode with DMX Record option
  • Internal fan with two speeds depending on internal heat (for low noise operation)
  • Overheat protection
  • Overload protection by circuit breakers (1P or optionally 1P+N)
  • SoftFlash handling to eliminate MCB strikedown
  • DMX-512 (DMX-512A ready) control
  • Factory reset to restore all parameters

Delta-Star input for Mini dimmer range

If your power supply is 3P+PE 230V (specially in cruise ships or in Norway or in Belgium) instead of the 3P+N+PE (star connection) or both can be found in your area this dimmer pack is the best option for you to handle this situation! The mains input of the dimmer can connected to both mains networks (delta 230V or star 230V).

Outputs are protected with 2P 4.5 kA circuit breakers. All other features are the same as in the standard Mini
dimmer series specification above. Basically these dimmers are available with Screw terminal block input/output configuration.

Special input/output configurations are available on request!

Technical Specifications

Mains
(MM610 / MM613 / MM616)
3P+N+PE (230 V/400 V Star 50 or 60 Hz)
3×20 A / 3×26 A / 3×32 A via 1.5 m length 5×4 mm² H07 rubber cable with CEE32A 5P plug
Output current
(MM610 / MM613 / MM616)
6×10 A / 6×13 A / 6×16 A
Filtering
100 μs (between 10%-90% at full load, 90° phase-angle)
Control connectors
5-pole XLR Input-Throughput for DMX-512 (optically and power isolated)
Protection
  • Inputs are EFT/ESD/Surge protected according to EN 61000-6-2
  • 1P (optionally 1P+N) Icn 4.5 kA circuit breakers on the outputs (Icn 6 kA on request)
  • Internal thermal protection against overheat
Corrosion protection
Electrostatic sintering (RAL7011)
Operating temperature
0 °C to 35 °C (RH: 0-90%, non-condensing)
 Dimensions
19” rack 2U 484×88×350 (W×H×D in mm + connectors)
Package dimensions: 600×520×190 (W×H×D in mm)
 Weight
11.5 kg (net), 13 kg (gross)
Pegasus MiniMaster dimmer – front view (rackable type)
Pegasus MiniMaster dimmer – front view (rackable type)Pegasus Mini Dimmer with Schuko, CEBEC, UK and Swiss outputsPegasus Mini Dimmer with CEE16A outputsPegasus Mini Dimmer with 1×16-pole ’Harting’ outputPegasus Mini Dimmer with 2×16-pole ’Harting’ outputPegasus Mini Dimmer with 1×19-pole ’Socapex’ outputPegasus Mini Dimmer with Screw terminal blocks

Hover over large images to zoom in.

Order information

Order Codes

Order codeDescription
MM 6xx-SSchuko outputs
MM 6xx-FCEBEC outputs
MM 6xx-UKUK BS13630 outputs
MM 6xx-SWSwiss outputs
MM 6xx-H1×16-pole ’Harting’ output
MM 6xx-H22×16-pole ’Harting’ outputs
MM 6xx-SX1×19-pole ’Socapex’ outputs
MM 6xx-SX22×19-pole ’Socapex’ outputs
MM 6xx-CCEE16A 3-pole outputs
MM 6xx-STBScrew terminal blocks for mains and outputs
MM 6xxD-STBDelta-Star input model with screw terminal blocks for mains and outputs

Where 'xx' means the output current per channel
(e.g. MM 610-S means the 6×10A model with Schuko sockets)

Orderable options

Option codeDescription
O2D-1P+N1P+N circuit breakers
O2D-6kA6kA Icn circuit breakers
O2D-RDMInstalled RDM function
O2D-PORTPortable set (incl. plastic handle and rubber feet
O2D-RUBRubber feet set (4 pcs)
O2D-BFKBackside fixation kit for rack mounting

Order Code for Delta-Star input model

MM 6xxD-STBScrew terminal blocks for mains and outputs

Where 'xx' means the output current per channel
(e.g. MM 610-S means the 6×10A model with Schuko sockets)

Orderable options for Delta-Star input model

Option codeDescription
O2D-6kA6kA Icn circuit breakers
O2D-AN0-10V analogue input
O2D-AN10V0-10V analogue input with 10V output
O2D-RDMInstalled RDM function
O2D-PORTPortable set (incl. plastic handle and rubber feet
O2D-RUBRubber feet set (4 pcs)
O2D-BFKBackside fixation kit for rack mounting