Description
The Pro series is the cost-effective solution compared to Master dimmers. These dimmers come with the same power electronic board (12×10 A or 6×25 A output current with True200μs filters (or True400μs with TV option), the difference applies in the user interface and the adjustable parameters of the dimmer channels. We reduced these parameters to the most commonly used ones to have an easily configurable dimmer pack for you.
Main features
- 12×2.3 kW (12×10 A) and 6×5.7 kW (6×25 A) models
- True200μs rise time filtering (True400μs with TV option)
- Control signals indicated by green LEDs
- AC outputs indicated by yellow LEDs
- Three LEDs to mains/module state check
- Easy setup by push buttons and seven segment display
- Test function to check channels one by one
- Internal chaser effects for standalone mode (steady and running ones)
- Internal fan with two speeds depending on internal heat (for low noise operation)
- Overheat protection
- Overload protection by circuit breakers (1P or optionally 1P+N)
- Two adjustable parameters for each phase module (four or two channels in one group):
- PreHeat: 0 % to 30 %
- Control curve: Voltage Linear, Phase-Angle Linear and Switch
- SoftFlash handling to eliminate MCB strikedown
- DMX-512 (DMX-512A ready) and optional analog (0-10 V) control
- Optional 10 V output for small analog control desks
- Option for backside XLR connectors
- Optionally built with 40 A/30 mA RCD or with 4-pole main switch
Technical Specifications
| Mains (12×2.3kW model) | 3P+N+PE (230V/400V Star 50 or 60 Hz) 3×40A via 1.5 m length 5×6 mm² H07 rubber cable without CEE plug |
|---|---|
| Output current / Filtering (12×2,3kW model) | 12×10A / 200μs (400μs with the TV option) (between 10%-90% at full load and 90° phase-angle) |
| Mains (6x5,7kW model) | 3P+N+PE (230V/400V Star 50 or 60 Hz) 3×50A via 1.5 m length 5×10 mm² H07 rubber cable without CEE plug |
| Output current / Filtering (6×5,7kW model) | 6×25A / 200μs (400μs with the TV option) (between 10%-90% at full load and 90° phase-angle) |
| Control connectors | 5-pole XLR Input-Throughput for DMX-512 (optically and power isolated) 15-pole SUB-D male for analogue inputs (optional) |
| Protections |
|
| Corrosion protection | Electrostatic sintering (RAL9005) |
| Operating temperature | 0 °C to 35 °C (RH: 0-90%, non-condensing) |
| Dimensions | 19” rack 3U 484×132×350 (W×H×D in mm + connectors) Package dimensions: 620×620×230 (W×H×D in mm) |
| Weight | 17 kg (net), 19 kg (gross) 23 kg (net), 25 kg (gross) with TV option. |
Hover over large images to zoom in.
Order information
Order Codes
| Order code | Description |
|---|---|
| PRO 1210-S | 12×2.3 kW with Schuko outputs |
| PRO 1210-F | 12×2.3 kW with CEBEC outputs |
| PRO 1210-UK | 12×2.3 kW with UK BS13630 outputs |
| PRO 1210-SW | 12×2.3 kW with 10 A Swiss outputs |
| PRO 1210-H1 | 12×2.3 kW with 1×24-pole ’Harting’ output |
| PRO 1210-H2 | 12×2.3 kW with 2×16-pole ’Harting’ outputs |
| PRO 1210-SX | 12×2.3 kW with 2×19-pole ’Socapex’ outputs |
| PRO 1210-C | 12×2.3 kW with CEE16A 3-pole outputs |
| PRO 1210-STB | 12×2.3 kW with Screw terminal blocks for mains and outputs |
| PRO 625-H | 6×5.7 kW with 2×6-pole 35 A ’Harting’ outputs |
| PRO 625-PC | 6×5.7 kW with 32 A PowerCon outputs |
| PRO 625-STB | 6×5.7 kW with Screw terminal blocks for mains and outputs |
Orderable options
| Option code | Description |
|---|---|
| O3D-TV | True400μs rise time filters for each output |
| O3D-B | DMX input on the back of the unit |
| O3D-1P+N | 1P+N circuit breakers |
| O3D-6kA | 6kA Icn circuit breakers |
| O3D-RCD | Built-in RCD (40 A/30 mA) |
| O3D-MS | Built-in main switch (4-pole) |
| O3D-CEE | Mains cable with CEE plug |
| O3D-AN | 0-10V analogue input |
| O3D-AN10V | 0-10V analogue input with 10V output |
| O3D-RDM | Installed RDM function |
| O3D-RUB | Rubber feet set (4 pcs) |
| O3D-BFK | Backside fixation kit for rack mounting |
