Pegasus Pro2 dimmers

Description

This Pro2 dimmer family is the second generation of our well-known famous Pro series. Since we lounched the Pro series the life has been changed and following these changes we made a face lift with a user friendly interface and we integrated a lot common requested features which was missed by the users.

Main features

  • 12×2.3 kW (12×10A), 12×3 kW (12×13A) and 6×5.7 kW (6×25A) models
  • True225μs (12×10A) or True250μs (12×13A and 6×25A ) rise time filtering
  • Control signals indicated by green LEDs
  • AC outputs indicated by yellow LEDs
  • Three LEDs to mains/module state check
  • User friendly menu system with LCD and four push buttons
  • Test function to check outputs/loads
  • Internal chaser effects for standalone mode (steady and running ones)
  • Individually adjustable parameters for each channels like:
    DMX address (softpatch), PreHeat level, Control curve and Limit level
  • Seven built-in and one user editable control characteristics
  • 20-step sceen memory with DMX recording option
  • Configurable events for DMX signal failure (keep, fade out, or play selected memory)
  • Factory restore of parameters
  • Internal fan with two speeds depending on internal heat (for low noise operation)
  • Overheat protection
  • Overload protection by circuit breakers (1P, 1P+N or 2P)
  • SoftFlash handling to eliminate MCB strikedown
  • DMX-512 (DMX-512A ready) and optional analog (0-10 V) control
  • Optional 10 V output for small analog control desks
  • Option for backside XLR connectors
  • Optionally built with 30 mA RCD or with 4-pole main switch

Technical Specifications

Mains
(12×2.3kW model)
3P+N+PE (230V/400V Star 50 or 60 Hz) 3×40A via 1.5 m length 5×6 mm² H07 rubber cable without CEE plug
Output current / Filtering
(12×2,3kW model)
12×10A / 200μs
(between 10%-90% at full load and 90° phase-angle)
Mains
(12×3kW model)
3P+N+PE (230V/400V Star 50 or 60 Hz) 3×52A via 1.5 m length 5×10 mm² H07 rubber cable without CEE plug
Output current / Filtering
(12×3kW model)
12×13A / 250μs
(between 10%-90% at full load and 90° phase-angle)
Mains
(6x5,7kW model)
3P+N+PE (230V/400V Star 50 or 60 Hz) 3×50A via 1.5 m length 5×10 mm² H07 rubber cable without CEE plug
Output current / Filtering
(6×5,7kW model)
6×25A / 250μs
(between 10%-90% at full load and 90° phase-angle)
Control connectors
5-pole XLR Input-Throughput for DMX-512 (optically and power isolated)
15-pole SUB-D male for analogue inputs (optional)
Protections
  • Inputs are EFT/ESD/Surge protected according to EN 61000-6-2
  • 1P (optionally 1P+N) Icn 4.5 kA circuit breakers on the outputs (Icn 6 kA on request)
  • Internal thermal protection against overheat
Corrosion protection
Electrostatic sintering (RAL9005)
Operating temperature
0 °C to 35 °C (RH: 0-90%, non-condensing)
 Dimensions
19” rack 3U 484×132×350 (W×H×D in mm + connectors)
Package dimensions: 620×620×230 (W×H×D in mm)
 Weight

18 kg (net), 20 kg (gross) / 12x10A model
19 kg (net), 21 kg (gross) / 12x10A model

Pegasus Pro II digital dimmer - front view
Pegasus Pro II digital dimmer - front view12-channel 3U digital dimmer with Schuko, CEBEC, UK and Swiss outputs12-channel 3U digital dimmer with CEE16A outputs12-channel 3U digital dimmer with 1×24-pole ’Harting’ output12-channel 3U digital dimmer with 2×16-pole ’Harting’ outputs12-channel 3U digital dimmer with 2×19-pole ’Socapex’ outputs12-channel 3U digital dimmer with Screw terminal blocks6-channel 3U digital dimmer with 2×6 pole 35 A ’Harting’ outputs6-channel 3U digital dimmer with 32 A PowerCon outputs

Hover over large images to zoom in.

Order information

Order Codes(*)

Order codeDescription
PRO2-12xx-S
12×2.3 kW or 12×3 kW with Schuko outputs
PRO2-12xx-F
12×2.3 kW or 12×3 kW with CEBEC outputs
PRO2-12xx-UK12×2.3 kW or 12×3 kW with UK BS13630 outputs
PRO2-12xx-SW12×2.3 kW or 12×3 kW with 10A or 16A Swiss outputs
PRO2-12xx-PC12×2.3 kW or 12×3 kW with 20A Powercon outputs
PRO2-12xx-H112×2.3 kW or 12×3 kW with 1×24-pole ’Harting’ output
PRO2-12xx-H212×2.3 kW or 12×3 kW with 2×16-pole ’Harting’ outputs
PRO2-12xx-SX12×2.3 kW or 12×3 kW with 2×19-pole ’Socapex’ outputs
PRO2-12xx-C12×2.3 kW or 12×3 kW with CEE16A 3-pole outputs
PRO2-12xx-STB12×2.3 kW or 12×3 kW with Screw terminal blocks for mains and outputs
PRO2-625-H6x5.7kW with 2x6-pole 35A Harting outputs
PRO2-625-PC6×5.7 kW with 32A Powercon outputs
PRO2-625-STB6×5.7 kW with Screw terminal blocks for mains and outputs

Orderable options

Option codeDescription
O3D-BDMX input on the back of the unit
O3D-1P+N1P+N circuit breakers
O3D-6kA6kA Icn circuit breakers
O3D-RCD
Built-in RCD (40 A/30 mA)
O3D-MS
Built-in main switch (4-pole)
O3D-CEEMains cable with CEE plug
O3D-AN0-10V analogue input
O3D-AN10V0-10V analogue input with 10V output
O3D-RDMInstalled RDM function
O3D-RUBRubber feet set (4 pcs)
O3D-BFKBackside fixation kit for rack mounting

(*) where 'xx' means the output current (10A or 13A)