This dimmer model is the 5.7kW version of our MiniMaster dimmer range.
Description
- 3×5.7 kW (3×25A)
- Mains input via rubber cable with CEE32A 5P plug or on Screw terminal blocks
- True100μs rise time filtering
- Easy menu control with four push buttons and blue LCD
- Local control with seven illuminated slide potmeters (for the 6 channels Grand Master)
- Control signals indicated by green LEDs
- AC output indicated by yellow LEDs
- Global DMX address set or SoftPatch
- Individually selectable parameters per channel:
- PreHeat
- MaxLevel
- Control curves (Voltage Linear, Phase-Angle Linear,Square, Fluorescent, Switch and User-Editable)
- DMX Address (SoftPatch)
- Test function to check channels one by one
- User editable 20-step sequence for standalone mode with DMX Record option
- Internal fan with two speeds depending on internal heat (for low noise operation)
- Overheat protection
- Overload protection by circuit breakers (1P or optionally 1P N)
- SoftFlash handling to eliminate MCB strikedown
- DMX-512 (DMX-512A ready) control
- Factory reset to restore all parameters
If your power supply is 3P PE 230V (specially in cruise ships or in Norway or in Belgium) instead of the 3P N PE (star connection) or both can be found in your area this dimmer pack is the best option for you to handle this situation! The mains input of the dimmer can connected to both mains networks (delta 230V or star 230V).
Outputs are protected with 2P 4.5 kA circuit breakers. All other features are the same as in the standard Mini
dimmer series specification above. Basically these dimmers are available with Screw terminal block input/output configuration.
Special input/output configurations are available on request!
Technical Specifications
Pegasus Mini Master 3x5,7kW dimmers
Mains | 3P+N+PE (230 V/400 V Star 50 or 60 Hz) 3×25 A via 1.5 m length 5×4 mm² H07 rubber cable with CEE32A 5P plug |
Output current | 3×25 A |
Filtering | 100 μs (between 10%-90% at full load, 90° phase-angle) |
Control connectors | 5-pole XLR Input-Throughput for DMX-512 (optically and power isolated) |
Protection | -Inputs are EFT/ESD/Surge protected according to EN 61000-6-2 -1P, 1P+N or 2P Icn 4.5 kA circuit breakers or 30mA 1P+N RCBOs on the outputs (Icn 6kA on request) -Internal thermal protection against overheat |
Corrosion protection | Electrostatic sintering (RAL7011) |
Operating temperature | 0 °C to 35 °C (RH: 0-90%, non-condensing) |
Dimensions | 19” rack 2U 484×88×350 (W×H×D in mm + connectors) Package dimensions: 600×520×190 (W×H×D in mm) |
Weight | 11.5 kg (net), 13 kg (gross) |