This unit is a one-channel digital dimmer which is unique if you have to control only a few circuits in your architectural installation. The output power can be up to 2.3kW (10A), which is controlled by phase angle control (TRIAC).
SKU:
ARC-01Main features:
This single-channel architectural dimmer module comes with a test function for load checking. Control modes and fade times are selectable by DIP switches on the PCB. All control inputs can be connected in parallel to allow the control of more than one unit at the same time.
The output level can be adjusted with four methods:
- 0-10V analogue input (Built in +10V output for potmeter)
- DMX-512 input (binary selectable start address on DIP switches)
- Two push buttons (UP/DOWN) with selectable fade time (0s-12s)
- Three push buttons (MAX/MIDDLE/MIN)
| Mains | 115 V / 230 V 50 or 60 Hz 10 A |
| Filtering | 75 μs between 10% and 90% at full load and 90° phase angle |
| Mouting type | Plastic PCB holder for TS and C rails |
| Operating temperature | 0 °C to 35 °C (RH: 0-90%, non-condensing) |
| Dimensions | 135×77×72 (W×H×D in mm) Packaging dimensions: 140×85×80 (W×H×D in mm) |
| Weight | 0.6 kg (net), 1 kg (gross) |
