PRO2-1216-S in 3DPRO2-625-H in 3D

The Pro2 series is the second generation of our famous Pro dimmer. It gives you more powerful feature for your installations and events plus the new higher rise time output filters make less noise than before.

We recommend the ExBox 3-way Power , ExBox 6-way Power and ExBox 12-way Power breakout boxes for this dimmer.

View Manual
View Catalogue


PRO2-12xx ; PRO2-625
Main features:
  • Four different power output models: 12×10A (12×2,3kW), 12×13A (12×3kW) 12×16A (12×3,7kW) and 6×25A (6×5,7kW)
  • True225/250μs rise time filtering
  • Easy menu control with four push buttons and blue 2×8 character LCD
  • Control signals indicated by green LEDs
  • AC outputs indicated by yellow LEDs
  • Global DMX address set or SoftPatch
  • Individually selectable parameters per channel:
    • PreHeat
    • Maximum Level
    • Control curves (Voltage Linear, 120V, Square, Fluorescent, TV, BBC, Switch and User-Editable)
    • DMX Address (SoftPatch)
  • Test function to check channels one by one
  • User editable 16 scene memory for standalone mode with DMX Record option
  • Internal fan with two speeds plus off depending on internal heat (for low noise operation)
  • Overheat protection (dim down to 50%)
  • Overload protection by circuit breakers (1P, 1P+N or 2P) or 30mA 1P+N RCBOs
  • Line-Neutral swap detection at start up
  • SoftFlash handling to eliminate MCB strikedown
  • DMX-512 (DMX-512A ready) and optional analogue (0-10V) control
  • Optional 10V output for small analog control desks
  • Factory reset to restore all parameters
  • Option for backside XLR connectors
  • Optionally built with 40A/30 mA RCD or with 4-pole main switch
(12×2.3kW model)
3P+N+PE (230V/400V Star 50 or 60 Hz) 3×40A via 1.5 m length 5×6 mm² H07 rubber cable without CEE plug
Output current / Filtering
(12×2,3kW model)
12x10A / 225 μs between 10 %-90 % at full load and 90 ° phase-angle
(All other models)
3P+N+PE (230V/400V Star 50 or 60 Hz) 3×63A via 1.5 m length 5×10 mm² H07 rubber cable without CEE plug
(All other models)
250 μs between 10 %-90 % at full load and 90 ° phase-angle
Control connectors5-pole XLR Input-Throughput for DMX-512 (Input is optically and power isolated)
15-pole D-SUB male for analogue inputs (optional)
Protections-Inputs are EFT/ESD/Surge protected according to EN 61000-6-2
-1P, 1P+N or 2P Icn 4.5 kA circuit breakers or 30mA 1P+N RCBOs on the outputs
-Internal thermal protection against overheat
Corrosion protectionElectrostatic sintering (RAL9004, AkzoNobel)
Operating temperature0 °C to 35 °C (RH: 0-90%, non-condensing)
Dimensions19” rack 3U 484×132×350 (W×H×D in mm + connectors)
Package dimensions: 620×620×230 (W×H×D in mm)
Weight17 kg (net), 19 kg (gross) / 12x10A model
19 kg (net), 21 kg (gross) / all other models


Configure the product with options below and add to your quote request: