[image_rotator folder=”/wp-content/uploads/3U Dimmer látvány FLX2.1″]

Our WM dimmer range has been designed for architectural installations such as museums, interior light control, sport centers, and for many similar places where rack installation is not possible. This version of the WM series comes with 12-channel dimmer and/or relay modules up to 16 A per channel.

Product details




Main features
  • 12×1.4 kW (12×6 A), 12×2.3 kW (12×10 A),12×3 kW (12×13 A) and 12×3.7 kW (12×16 A) models
  • Orderable Dimmer or Relay modules per phase (each phase module contains four channels)
  • Orderable FLX feature for mixed installation (selectable dimmer or mechanical relay per output channel)
  • True100μs or True225/250μs rise time filtering for dimmer modules
  • 10 mm² terminal blocks for input mains, 4 mm² ones for outputs (optionally 16/6 mm² for input/outputs)
  • Cabling on the top via cable glands or through the backside of the unit
  • 4-pole main switch (or RCD as an option)
  • Easy menu control with five push buttons and large blue LCD
  • Control signals are indicated on LCD
  • Global DMX address set or SoftPatch
  • Individually selectable parameters per channel:
    • PreHeat
    • MaxLevel
    • Control curves (Voltage Linear, Phase-Angle Linear, Square,Fluorescent, Switch and User-Editable)
    • DMX Address (SoftPatch)
  • Incoming DMX level display for monitoring
  • Test function to check channels one by one
  • User editable 40-step sequence for standalone mode with DMX Record option
  • Internal fan with two speeds depending on internal heat (for low noise operation)
  • Overheat protection
  • Overload protection by circuit breakers (1P, 1P N or 2P) or 30mA RCBO
  • SoftFlash handling to eliminate MCB strikedown
  • DMX-512 (DMX-512A ready) and optional configurable analogue (0-10 V) control
  • Factory reset to restore all parameters
  • Optionally 12 analogue inputs which can be assigned to stored screens (one input is a dedicated panic control e.g. fire alarm)


Pegasus WM-12 dimmers

(WM1206 / WM1210 / WM1213 / WM1216)
3P+N+PE (230 V/400 V Star 50 or 60 Hz)
3×24 A / 3×40 A / 3×52 A /3×63 A
via screw terminal blocks (10 mm²)
Output current
(WM1206 / WM1210 / WM1213 / WM1216)
12×6 A / 12×10 A / 12×13 A / 12×16 A
(WM12xxA and WM12xxB)
100 μs (between 10%-90% at full load, 90° phase-angle)
(WM12xxC and WM12xxD)
225 μs (between 10%-90% at full load, 90° phase-angle)
ProtectionInputs are EFT/ESD/Surge protected according to EN 61000-6-2
1P, 1P+N or 2P Icn 4.5 kA circuit breakers on the outputs (Icn 6 kA on request)
Internal thermal protection against overheat
Corrosion protectionElectrostatic sintering (RAL7011)
Operating temperature0 °C to 35 °C (RH: 0-90%, non-condensing)
Dimensions440×630×140 (W×H×D in mm + cable gland)
Package dimensions: 560×780×260 (W×H×D in mm)
Weight22 kg (net), 25 kg (gross)

Configure the product with options below and add to your quote request:

cf7form shortcode key error, unable to find form, did you update your form key?